Installing an In-House Solutions or Mastercam post processor

Installing an In-House Solutions or Mastercam post processor

This article is designed to help you install and test your In House Solutions or Mastercam posts.  It contains Text and Video instructions.

Requirements

The following items will be delivered to you by email.
  1. An In House Solutions or Mastercam post
  2. A sample .mcam file.

Text Instructions

If you run into trouble at any point during the installation process, please reply to the post email and request support.  We will schedule a web meeting to assist with your post installation.

Post Installation
  1. Launch Mastercam.
  2. Download the post Content File.
  3. Drag and drop the post Content File over the graphics window of Mastercam.  The files will be automatically installed.
  4. Add the post to your Machine Definition list.  (Machine Tab > Mill Icon > Manage List > Select your new post > Click Add > Green Check)
  5. Launch the sample file included with your post, found in your \Shared Mastercam 20XX\MCAMNW Sample Files\ folder.  It will be named after your post.
  6. Select all the toolpaths in the first Toolpath group, and click G1 to post. 
  7. Verify that the post outputs completely. 

Post Corrections
  1. For In House Solutions posts, please send a zip2go of a sample part, along with edited code of your changes directly to the post developers at postdev@inhousesolutions.com
    1. Please CC us at support@mcamnw.com so we have eyes on that communication.
  2. For Mastercam posts, please visit out Post Services page on our website and submit a post modification request Post Processing Services - MCAM Northwest (mcamnw.com)

Video Instructions

Installing an In House Solutions or Mastercam post
​

    • Related Articles

    • Installing a Postability post

      This article is designed to help you install and test your Postability posts. It contains Text and Video instructions. Requirements The following items will be delivered to you by email. A Postability Post A sample .mcam file. Text Instructions If ...

    • Installing a Mastercam post with Machine Simulation

      This article is designed to help you install and test your Mastercam posts with Machine Simulation. It contains Text and Video instructions. An additional tutorial file from Mastercam is available for download at the bottom of this article. ...

    • Installing a Postability post with Machine Simulation

      This article is designed to help you install and test your Postability posts with Machine Simulation for Mastercam. It contains Text and Video instructions. An additional tutorial file from Mastercam is available for download at the bottom of this ...

    • Settings Migration - Migration Wizard

      Situation: Mastercam is successfully installed. Machine and control definitions, posts, libraries, and other configuration settings need to be pulled forward from a previous version of Mastercam. Solution: The Mastercam Migration Wizard can be used ...

    • Productivity+ for Mastercam

      This article is designed to help get you started with Productivity+ for Mastercam. Requirements A Mastercam License with Productivity+ A Post Processor which supports probing. A Renishaw Machine File (RenMF) - to inquire about availability of a RenMF ...