Licensing
Understanding the switch from a NetHasp to a Network Software License
TL;DR -As long as instructions are followed and resources are used, the switch to a NWSL from a NetHasp is fast, easy, and should have no noticeable downtime for the programming team -IT professionals generally prefer working with a NWSL over a ...
How to get a new Learning Edition license after it expires
Problem The Mastercam Learning Edition fails to load with the message: No valid Mastercam license found. The Mastercam Activation Wizard fails to activate the license with the message: The activation code has expired. Cause The Mastercam Learning ...
Licensing - Network Software License + Network Software License Updating
This article is designed to help get you started using your Network Software License for Mastercam, as well as instructions for updating Mastercam maintenance codes or Mastercam product codes. All licensing changes will take place on the computer ...
Licensing - Stand-alone Software License + Software License Updating
This article is designed to help get you started using your Stand-Alone Software License for Mastercam, as well as instructions for updating Mastercam maintenance codes or Mastercam product codes. Requirements A computer workstation with Mastercam ...
Licensing - Red NetHasp Setup + Updating NetHasp codes.
This article is designed to help get you started using your Red NetHasp for Mastercam licensing, as well as instructions for updating Mastercam maintenance codes or Mastercam product codes. Requirements Direct access to the computer acting as the ...
Licensing - Purple Hasp Setup + Updating Hasp codes.
This article is designed to help get you started using your Purple Hasp for Mastercam licensing, as well as instructions for updating Mastercam maintenance codes or Mastercam product codes. Requirements Direct access to the computer with the HASP ...
Mastercam.com Account Linking
Why link your mastercam.com account to your Mastercam license? Account Linking is important because it gives you access to current customer-only resources: User Forums - A place to communicate with the rest of the Mastercam community. You can ask ...
Cannot run HASP codes with hcode files (2022 and later)
Problem: User cannot run the .hcode file correctly to allow computer to run HASP, despite drivers being present (light on HASP is on). Cause: The HaspX utility is not installed with Mastercam after 2021. Users who are moving to 2022 or later on a new ...
Limiting what licensing is checked out with the Mastercam Launcher utility.
Situation: Mastercam is checking out too many product levels from your Network License, preventing programmers from accessing a license they need and causing other programmers to close Mastercam to release a license they didn't intend to check out in ...